M80x10 4-pole DC Motor

The M80 is a brush collector DC motor with permanent excitation. In brush DC Motors of this type the exciter field in the stator is built up by using continuous magnets. The commutation is achieved mechanically through a system of brushes and a collector which rotates on the rotor shaft.

The permanent excited brush DC motor is, due to its linear set of characteristic curves, a very well adaptable and controllable drive. At any desired cranking torque the motor can be operated with different power settings.

Design

• M80x10/I 4-pole 12/24V

Specification

• DC permanent magnet motor
• Graphit-copper brushes
• Motor housing zinc plated and chromized
• Ball bearings
• Insulation Class E (VDE 0530)

NOTICE: THIS IS A PRELIMINARY DATASHEET. START OF PRODUCTION IS PLANNED.
General data
Life-approx. *		h	3000
Permissible Shaft Loads Ball bearings**	axial radial	N N	40 100
Insulation Class	DIN VDE	0530	E
Protection Class	DIN VDE	0530	IP 40
RFI Suppression			feasible
*operation by nominal values **at 3000 rpm and 3000 hrs nominal life, simultaneous axial and radial loads

Standard types
Motortype	M80x10/I	M80x10/I
Order Nb.
Nominal Voltage (V)	12	24
Nominal Speed (1/min)	3000	3100
Nominal Torque (Ncm)	10,0	10,0
Nominal Current (A)	4,0	2,0
Output Power (W)	31,0	32,0
Speed Constant (1/min / Ncm)	77,8	71,5
Torque Constant (Ncm / A)	2,85	5,7
Inertia (gcm²)	765	765
Weight (kg)	0,88	0,88
Length L (mm)	57	57
Subject to change without notice

Motor Characterists