M36x13/20/30 DC Motor

The M36 is a brush collector DC motor with permanent excitation. In brush DC Motors of this type the exciter field in the stator is built up by using continuous magnets. The commutation is achieved mechanically through a system of brushes and a collector which rotates on the rotor shaft.

The permanent excitedbrush DC motor is, due to its linear set of characteristic curves, a very well adaptable and controllable drive. At any desired cranking torque the motor can be operated with different power settings.

Design

• M36x13/I 12/24V
• M36x20/I 12/24V
• M36x30/I 12/24V

Specification

• DC permanent magnet motor
• Graphit-copper brushes
• Motor housing zinc plated
• Ball bearings
• Mounting holes to DIN standard 42016

General data
Life-approx. *		h	3000
Permissible Shaft Loads Ball bearings**	axial radial	N N	30 80
Insulation Class	DIN VDE	0530	E
Protection Class	DIN VDE	0530	IP 40
RFI Suppression			feasible
*operation by nominal values **at 3000 rpm and 3000 hrs nominal life, simultaneous axial and radial loads

Standard types
Motortype	M36x13/I	M36x13/I	M36x20/I	M36x20/I	M36x30/I	M36x30/I
Order Nb.	220218	220219	220220	220221	220222	220223
Nominal Voltage (V)	12	24	12	24	12	24
Nominal Speed (1/min)	3000	3100	2900	2900	3050	3200
Nominal Torque (Ncm)	1,5	1,5	3	3	4	4
Nominal Current (A)	0,73	0,37	1,4	0,62	1,72	0,86
Output Power (W)	4,7	4,9	9,1	9,1	12,8	13,4
Speed Constant (1/min / Ncm)	633	566	350	333	238	213
Torque Constant (Ncm / A)	2,7	5,6	2,5	5,56	6,5	3,68
Inertia (/gcm²)	27	27	38	38	53	53
Weight (kg)	0,2	0,2	0,25	0,25	0,3	0,3
Length L (mm)	51	51	60	60	70	70
Subject to change without notice

Motor Characterists