OAS66 (TS5607)

OAS66 single-turn incremental shaft model TS5607. Used for converting analog rotating value, shaft angle position, etc. to digital has increased as measurement for physical value and automation for control systems are advanced. Ideal for press machine use.

 

Features

• Vitra Rugged Model
• Strobe Signal

Specifications

Resolution	0 to 359C/T
Output Phase	BCD
Max Response Frequency	2.5kHz
Voltage Supply	DC+12V
Consumption Current (1)	300mA Max
Output Form	Open collector
Shaft Loading (2)	Radial    98N                 (10kgf) Axial       49N                 (5kgf)
Starting Torque	9.8x10-2 N·m (1gf·cm Max)
Protection	IP=54
Operating Tem Range	-10 to +70°C
Vibration (3)	continuous 98m/s2(10G)
Shock (4)	490m/s2 (50G)
Mass	0.6kg Max

⁽¹⁾ Current consumption: This is a specification for no loading at output circuit.
⁽²⁾ The specification for shaft allowable load shall be a mechanical value.
     Actual specification allows us to recommend within 20 percents of the specification.
⁽³⁾ Vibration: This is a value under the condition of meeting the total of 6 (six) hours consisting of 2 hours for each of X, Y and Z axis.
⁽⁴⁾ Shock: This is a value under the condition of meeting the total of 18(eighteen) times consisting of 3 times for each of X, Y and Z axis.