The Violin series of miniature servo amplifiers for DC brush motors incorporates custom mixed analog/digital
ICs and a hybrid power stage.
The basic configuration is a current mode amplifier targeting the OEM market.
No trimmers are used in the basic version.
The product meets UL508c and relevant CE regulations.
The power stage is implemented on a single ceramic substrate. This design enables very high thermal conductivity,
high current carrying capacity, better EMC and good mechanical strength.
The control section is implemented by dedicated custom ICs which contribute to higher reliability through
lower component count and improved performance Through board-level Integration.
Feature
Unit
5/60
15/60
25/60
10/100
15/100
20/100
6/200
10/200
15/200
Minimum Supply Voltage
VDC
10
20
40
Maximum Supply Voltage
VDC
60
96
196
Continuous Output Current
A
5
15
25
10
15
20
6
10
15
Peak Output Current
A
10
30
50
20
30
40
12
20
30
Max. Output Power from the Drive
W
300
900
1500
960
1440
1920
1180
1960
2940
Efficiency at Rated Power
%
>97
Overall Dimensions
mm
(in)
82 x 47 x 25.4 (3.3 x 1.9 x 1.0)
Weight
gm (oz)
180 (6.4)
Product Catalog Number:
Standard Features
Operation in current mode
Internal DC-to-DC converter for single supply operation
Zero deadband
Excellent linearity
External continuous and peak current limit adjustments
Current feedback multiplier for low-current motors
Remote current gain control
Ultra compact size
Copper base plate with plastic housing (UL94V0 recognized)
High reliability with field-proven MTBF of over 500,000 working hours
Control Connections
Current command input
External continuous current limit
External peak current limit
Current monitor
Current gain control
Motor Output
Motor output phases
Nominal output continuous current: up to 25A
Peak output current: up to 50A
Built-In Protection
Shorts between motor power outputs
Shorts between motor power outputs and power input returns
Excess temperature
Under/Over voltage
Failure of internal power supplies
Latch mode for each protective feature
Accessories
VIO-STARTER
The
VIO-STARTER is an add-on interconnection board for the VIO servo amplifier that plugs on top of the amplifier.
The purpose of this board is the translation of the VIO solder type pins into screw type terminals thus enabling
easy connectivity for evaluation and low quantity applications.
The
VIO-STARTER is an add-on interconnection board for the VIO servo amplifier that plugs on top of the amplifier.
The purpose of this board is the translation of the VIO solder type pins into screw type terminals thus enabling
easy connectivity for evaluation and low quantity applications.
